Assignment Example | Topics and Well Written Essays - 750 words - 39

Assignment ExampleUnder the center part of the floor where ordain be a series of longitudinal beams, each 18 feett long, at 6 feet 6 inches center-to-center distance.The transverse beams will be connected to pairs of columns in the North-South direction. The longitudinal beams will be rigid on top of the columns in the East-West direction. The roof will be built using a series of sheets that will be placed on top of the longitudinal beams to enclose the structure.To prepare the ground for the centre, approximately 650 cubic yards of earth excavation and landscaping will needed to for the floor slab, streamlet pool (see below), and foundations, and to reconstruct the parking lot embankment. It is expected that a backhoe loader will be used to load a truck that will cash in ones chips all soil and any other water material encountered during construction.Access to the proposed Center will be through a pair of large double-doors on the East side, each 15 feet wide and 10 feet high, a nd two pairs of double-doors on North side, each 8 feet wide and 7 feet high.There will be two key internal features. Firstly, there will be a Construction Laboratory (or workshop) for the concrete canoes, situated at the West end of the proposed Center, which will include overhead storage racks. The interior drywall for this facility is to be estimated and constructed at a later date.Secondly, there will be a Test kitty for the concrete canoes, whose internal dimensions will be depth 6 feet, width 10 feet, length 100 feet a further 800 cubic feet of reinforced concrete will be required This will require a further 6000 cubic feet (23 cubic yards) of excavation, which will needed to the accounted for as part of the Estimates presented below. The Test puddle will a rectangular trough shape with 1 foot wall and floor thicknesses. The Test Pool will positioned approximately centered in and underneath the floor slab. A water filter and pump